Current File : //proc/24364/root/var/lib/dpkg/info/libvirt-daemon-system.postinst
#!/bin/sh
# postinst script for libvirt-daemon-system
#
# see: dh_installdeb(1)
set -e
# summary of how this script can be called:
# * <postinst> `configure' <most-recently-configured-version>
# * <old-postinst> `abort-upgrade' <new version>
# * <conflictor's-postinst> `abort-remove' `in-favour' <package>
# <new-version>
# * <postinst> `abort-remove'
# * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
# <failed-install-package> <version> `removing'
# <conflicting-package> <version>
# for details, see http://www.debian.org/doc/debian-policy/ or
# the debian-policy package
# Source debconf library.
. /usr/share/debconf/confmodule
# Allocated UID and GID for libvirt-qemu
LIBVIRT_QEMU_UID=64055
LIBVIRT_QEMU_GID=64055
add_users_groups()
{
if ! getent group libvirt >/dev/null; then
if getent group libvirtd >/dev/null; then
gid=`getent group libvirtd | getent group libvirtd | cut -d: -f3`
groupadd --system --non-unique --gid "$gid" libvirt
else
addgroup --quiet --system libvirt
fi
fi
# Add each admin user to the libvirt group - for systems installed
# before precise
for u in $(getent group admin | sed -e "s/^.*://" -e "s/,/ /g"); do
adduser "$u" libvirt >/dev/null || true
done
# Add each sudo user to the libvirt group
for u in $(getent group sudo | sed -e "s/^.*://" -e "s/,/ /g"); do
adduser "$u" libvirt >/dev/null || true
done
if ! getent group kvm >/dev/null; then
addgroup --quiet --system kvm
fi
# user and group libvirt runs qemu/kvm instances with
if ! getent passwd libvirt-qemu >/dev/null; then
# set uid if available (expected); don't fail otherwise.
PARAMETER_UID=''
if ! getent passwd $LIBVIRT_QEMU_UID >/dev/null; then
PARAMETER_UID="--uid $LIBVIRT_QEMU_UID"
fi
adduser --quiet \
--system \
--ingroup kvm \
--quiet \
--disabled-login \
--disabled-password \
--home /var/lib/libvirt \
--no-create-home \
--gecos "Libvirt Qemu" \
$PARAMETER_UID \
libvirt-qemu
fi
if ! getent group libvirt-qemu >/dev/null; then
# set gid if available (expected); don't fail otherwise.
PARAMETER_GID=''
if ! getent group $LIBVIRT_QEMU_GID >/dev/null; then
PARAMETER_GID="--gid $LIBVIRT_QEMU_GID"
fi
addgroup --quiet --system $PARAMETER_GID libvirt-qemu
adduser --quiet libvirt-qemu libvirt-qemu
fi
if ! getent group libvirt-dnsmasq >/dev/null; then
addgroup --quiet --system libvirt-dnsmasq
fi
if ! getent passwd libvirt-dnsmasq >/dev/null; then
adduser --quiet \
--system \
--ingroup libvirt-dnsmasq \
--disabled-login \
--disabled-password \
--home /var/lib/libvirt/dnsmasq \
--no-create-home \
--gecos "Libvirt Dnsmasq" \
libvirt-dnsmasq
fi
# For upgrades that still have the insecure libvirt group (too much privileges)
if [ -n "$2" ] && dpkg --compare-versions -- "$2" le-nl "4.0.0-1ubuntu5~"; then
if [ "$(id -r -g -n libvirt-dnsmasq)" == "libvirt" ]; then
echo "assigning libvirt-dnsmasq a less privileged group (libvirt->libvirt-dnsmasq)"
usermod libvirt-dnsmasq -g libvirt-dnsmasq
fi
fi
}
includes_addr() {
addr=${1}
mask=${2}
viraddr=${3}
for n in $(seq 1 4); do
curaddrcomponent=$(echo "${addr}" | awk -F. '{ print $'"${n}"' }')
tgtaddrcomponent=$(echo "${viraddr}" | awk -F. '{ print $'"${n}"' }')
cmp=$((mask/8))
if [ "${cmp}" -ge "${n}" ]; then
if [ "${curaddrcomponent}" -ne "${tgtaddrcomponent}" ]; then
echo "false"
return
fi
elif [ "$((cmp+1))" -ge "${n}" ]; then
# do we bother comparing partial (i.e. /25)?
:
else
break
fi
done
echo "true"
return
}
set_autostart()
{
echo "Enabling libvirt default network"
if [ ! -e /etc/libvirt/qemu/networks/autostart/default.xml ]; then
ln -s /etc/libvirt/qemu/networks/default.xml \
/etc/libvirt/qemu/networks/autostart/
fi
}
# on first install, don't set default network to autostart if we already
# have a conflicting network. Good for instance for nested libvirt.
maybe_set_autostart()
{
# 122 is the common default, but iterate a few more options
for thirdoctet in $(seq 122 128); do
tryip="192.168.${thirdoctet}.1"
found=0
for pair in $(ip addr show | grep "inet\>" |awk '{ print $2 }'); do
a=$(echo "$pair" | awk -F/ '{ print $1}')
m=$(echo "$pair" | awk -F/ '{ print $2}')
res=$(includes_addr "${a}" "${m}" "${tryip}")
if [ "${res}" = "true" ]; then
found=1
fi
done
if [ $found -ne 1 ]; then
# found a free subnet
if [ "${thirdoctet}" -ne "122" ]; then
echo "Default libvirt network on 192.168.122.1/24 already taken"
echo "Changing to free 192.168.${thirdoctet}.1/24"
sed -i 's/192.168.122/192.168.'"${thirdoctet}"'/g' /etc/libvirt/qemu/networks/default.xml
fi
set_autostart
return
fi
done
echo "Not enabling default network as no free network was found"
}
add_statoverrides()
{
ROOT_DIRS="\
/var/lib/libvirt/images/ \
/var/lib/libvirt/boot/ \
/var/cache/libvirt/ \
"
QEMU_DIRS="\
/var/lib/libvirt/qemu/ \
/var/cache/libvirt/qemu/ \
/var/lib/libvirt/qemu/channel/ \
/var/lib/libvirt/qemu/channel/target/ \
"
SANLOCK_DIR="/var/lib/libvirt/sanlock"
QEMU_CONF="/etc/libvirt/qemu.conf"
for dir in ${ROOT_DIRS}; do
if ! dpkg-statoverride --list "${dir}" >/dev/null 2>&1; then
[ ! -e "${dir}" ] || chown root:root "${dir}"
[ ! -e "${dir}" ] || chmod 0711 "${dir}"
fi
done
for dir in ${QEMU_DIRS}; do
if ! dpkg-statoverride --list "${dir}" >/dev/null 2>&1; then
[ ! -e "${dir}" ] || chown libvirt-qemu:libvirt-qemu "${dir}"
[ ! -e "${dir}" ] || chmod 0750 "${dir}"
fi
done
if ! dpkg-statoverride --list "${SANLOCK_DIR}" >/dev/null 2>&1; then
[ ! -e "${SANLOCK_DIR}" ] || chown root:root "${SANLOCK_DIR}"
[ ! -e "${SANLOCK_DIR}" ] || chmod 0700 "${SANLOCK_DIR}"
fi
if ! dpkg-statoverride --list "${QEMU_CONF}" >/dev/null 2>&1; then
[ ! -e "${QEMU_CONF}" ] || chown root:root "${QEMU_CONF}"
[ ! -e "${QEMU_CONF}" ] || chmod 0600 "${QEMU_CONF}"
fi
}
case "$1" in
configure)
add_users_groups
add_statoverrides
# Make sure the directories don't get removed on package removal since
# logrotate chokes otherwise.
for dir in qemu uml lxc; do
touch /var/log/libvirt/"${dir}"/.placeholder
done
# Remove left over empty directory from pre 1.2.7
[ ! -d /etc/apparmor.d/libvirtd ] || rmdir --ignore-fail-on-non-empty /etc/apparmor.d/libvirtd
# Force virtlockd to reexec if enabled
if [ -d /run/systemd/system ]; then
! systemctl is-active -q virtlogd || systemctl reload virtlogd.service >/dev/null
! systemctl is-active -q virtlockd || systemctl reload virtlockd.service >/dev/null
fi
# Force refresh of capabilties (#731815)
rm -f /var/cache/libvirt/qemu/capabilities/*.xml
# 1. On an initial package install, create the default network autostart
# symlink.
# 2. If the default.xml existed before upgrade, make sure it is
# recreated.
# This won't be a problem on most upgrades, but when upgrading from a
# version where the symlink came with the package, it will.
# 3. If upgrading from one of the bad libvirt versions which deleted the
# symlink wrongly, recreate it
EXISTED="/etc/libvirt/qemu/networks/autostart/TMP_defaultexisted"
if [ -z $2 ]; then
maybe_set_autostart
elif [ -e "$EXISTED" ]; then
# on upgrade, if default network was previously autostarted,
# continue to do so.
rm -f "$EXISTED"
set_autostart
fi
# transition from packaged to dh_apparmor generated local aa includes
# all other cases (no delta rm, abort, ...) are handled by rm_conffile
# can be dropped >18.04
if [ -n "$2" ] && dpkg --compare-versions -- "$2" le-nl "3.5.0-1ubuntu1~"; then
for CONFFILE in /etc/apparmor.d/local/usr.sbin.libvirtd /etc/apparmor.d/local/usr.lib.libvirt.virt-aa-helper; do
if [ -e "$CONFFILE.dpkg-backup" ]; then
echo "Obsolete conffile $CONFFILE has been modified by you."
echo "These local includes are now generated by dh_apparmor"
echo "Carrying over your changes into $CONFFILE ..."
mv -f "$CONFFILE.dpkg-backup" "$CONFFILE"
fi
done
fi
;;
abort-upgrade|abort-remove|abort-deconfigure)
;;
*)
echo "postinst called with unknown argument \`$1'" >&2
exit 1
;;
esac
db_stop
# dh_installdeb will replace this with shell code automatically
# generated by other debhelper scripts.
# Automatically added by dh_apparmor/2.12-4ubuntu5.1
aa_is_enabled() {
if command aa-enabled >/dev/null 2>&1; then
# apparmor >= 2.10.95-2
aa-enabled --quiet 2>/dev/null
else
# apparmor << 2.10.95-2
# (This should be removed once Debian Stretch and Ubuntu 18.04 are out.)
rc=0
aa-status --enabled 2>/dev/null || rc=$?
[ "$rc" = 0 ] || [ "$rc" = 2 ]
fi
}
if [ "$1" = "configure" ]; then
APP_PROFILE="/etc/apparmor.d/usr.lib.libvirt.virt-aa-helper"
if [ -f "$APP_PROFILE" ]; then
# Add the local/ include
LOCAL_APP_PROFILE="/etc/apparmor.d/local/usr.lib.libvirt.virt-aa-helper"
test -e "$LOCAL_APP_PROFILE" || {
mkdir -p `dirname "$LOCAL_APP_PROFILE"`
install --mode 644 /dev/null "$LOCAL_APP_PROFILE"
}
# Reload the profile, including any abstraction updates
if aa_is_enabled; then
apparmor_parser -r -T -W "$APP_PROFILE" || true
fi
fi
fi
# End automatically added section
# Automatically added by dh_apparmor/2.12-4ubuntu5.1
aa_is_enabled() {
if command aa-enabled >/dev/null 2>&1; then
# apparmor >= 2.10.95-2
aa-enabled --quiet 2>/dev/null
else
# apparmor << 2.10.95-2
# (This should be removed once Debian Stretch and Ubuntu 18.04 are out.)
rc=0
aa-status --enabled 2>/dev/null || rc=$?
[ "$rc" = 0 ] || [ "$rc" = 2 ]
fi
}
if [ "$1" = "configure" ]; then
APP_PROFILE="/etc/apparmor.d/usr.sbin.libvirtd"
if [ -f "$APP_PROFILE" ]; then
# Add the local/ include
LOCAL_APP_PROFILE="/etc/apparmor.d/local/usr.sbin.libvirtd"
test -e "$LOCAL_APP_PROFILE" || {
mkdir -p `dirname "$LOCAL_APP_PROFILE"`
install --mode 644 /dev/null "$LOCAL_APP_PROFILE"
}
# Reload the profile, including any abstraction updates
if aa_is_enabled; then
apparmor_parser -r -T -W "$APP_PROFILE" || true
fi
fi
fi
# End automatically added section
# Automatically added by dh_systemd_enable/11.1.6ubuntu2
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
# This will only remove masks created by d-s-h on package removal.
deb-systemd-helper unmask 'libvirt-guests.service' >/dev/null || true
# was-enabled defaults to true, so new installations run enable.
if deb-systemd-helper --quiet was-enabled 'libvirt-guests.service'; then
# Enables the unit on first installation, creates new
# symlinks on upgrades if the unit file has changed.
deb-systemd-helper enable 'libvirt-guests.service' >/dev/null || true
else
# Update the statefile to add new symlinks (if any), which need to be
# cleaned up on purge. Also remove old symlinks.
deb-systemd-helper update-state 'libvirt-guests.service' >/dev/null || true
fi
fi
# End automatically added section
# Automatically added by dh_systemd_enable/11.1.6ubuntu2
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
# This will only remove masks created by d-s-h on package removal.
deb-systemd-helper unmask 'libvirtd.service' >/dev/null || true
# was-enabled defaults to true, so new installations run enable.
if deb-systemd-helper --quiet was-enabled 'libvirtd.service'; then
# Enables the unit on first installation, creates new
# symlinks on upgrades if the unit file has changed.
deb-systemd-helper enable 'libvirtd.service' >/dev/null || true
else
# Update the statefile to add new symlinks (if any), which need to be
# cleaned up on purge. Also remove old symlinks.
deb-systemd-helper update-state 'libvirtd.service' >/dev/null || true
fi
fi
# End automatically added section
# Automatically added by dh_systemd_enable/11.1.6ubuntu2
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
# This will only remove masks created by d-s-h on package removal.
deb-systemd-helper unmask 'virtlockd.service' >/dev/null || true
# was-enabled defaults to true, so new installations run enable.
if deb-systemd-helper --quiet was-enabled 'virtlockd.service'; then
# Enables the unit on first installation, creates new
# symlinks on upgrades if the unit file has changed.
deb-systemd-helper enable 'virtlockd.service' >/dev/null || true
else
# Update the statefile to add new symlinks (if any), which need to be
# cleaned up on purge. Also remove old symlinks.
deb-systemd-helper update-state 'virtlockd.service' >/dev/null || true
fi
fi
# End automatically added section
# Automatically added by dh_systemd_enable/11.1.6ubuntu2
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
# This will only remove masks created by d-s-h on package removal.
deb-systemd-helper unmask 'virtlockd.socket' >/dev/null || true
# was-enabled defaults to true, so new installations run enable.
if deb-systemd-helper --quiet was-enabled 'virtlockd.socket'; then
# Enables the unit on first installation, creates new
# symlinks on upgrades if the unit file has changed.
deb-systemd-helper enable 'virtlockd.socket' >/dev/null || true
else
# Update the statefile to add new symlinks (if any), which need to be
# cleaned up on purge. Also remove old symlinks.
deb-systemd-helper update-state 'virtlockd.socket' >/dev/null || true
fi
fi
# End automatically added section
# Automatically added by dh_systemd_enable/11.1.6ubuntu2
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
# This will only remove masks created by d-s-h on package removal.
deb-systemd-helper unmask 'virtlogd.service' >/dev/null || true
# was-enabled defaults to true, so new installations run enable.
if deb-systemd-helper --quiet was-enabled 'virtlogd.service'; then
# Enables the unit on first installation, creates new
# symlinks on upgrades if the unit file has changed.
deb-systemd-helper enable 'virtlogd.service' >/dev/null || true
else
# Update the statefile to add new symlinks (if any), which need to be
# cleaned up on purge. Also remove old symlinks.
deb-systemd-helper update-state 'virtlogd.service' >/dev/null || true
fi
fi
# End automatically added section
# Automatically added by dh_systemd_enable/11.1.6ubuntu2
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
# This will only remove masks created by d-s-h on package removal.
deb-systemd-helper unmask 'virtlogd.socket' >/dev/null || true
# was-enabled defaults to true, so new installations run enable.
if deb-systemd-helper --quiet was-enabled 'virtlogd.socket'; then
# Enables the unit on first installation, creates new
# symlinks on upgrades if the unit file has changed.
deb-systemd-helper enable 'virtlogd.socket' >/dev/null || true
else
# Update the statefile to add new symlinks (if any), which need to be
# cleaned up on purge. Also remove old symlinks.
deb-systemd-helper update-state 'virtlogd.socket' >/dev/null || true
fi
fi
# End automatically added section
# Automatically added by dh_systemd_start/11.1.6ubuntu2
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
if [ -d /run/systemd/system ]; then
systemctl --system daemon-reload >/dev/null || true
if [ -n "$2" ]; then
_dh_action=restart
else
_dh_action=start
fi
deb-systemd-invoke $_dh_action 'virtlockd.socket' >/dev/null || true
fi
fi
# End automatically added section
# Automatically added by dh_systemd_start/11.1.6ubuntu2
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
if [ -d /run/systemd/system ]; then
systemctl --system daemon-reload >/dev/null || true
deb-systemd-invoke start 'virtlockd.service' 'virtlockd.socket' >/dev/null || true
fi
fi
# End automatically added section
# Automatically added by dh_installdeb/11.1.6ubuntu2
dpkg-maintscript-helper mv_conffile /etc/default/libvirt-bin /etc/default/libvirtd 1.2.6-1~ libvirt-bin -- "$@"
# End automatically added section
# Automatically added by dh_installdeb/11.1.6ubuntu2
dpkg-maintscript-helper mv_conffile /etc/init.d/libvirt-bin /etc/init.d/libvirtd 1.2.6-1~ libvirt-bin -- "$@"
# End automatically added section
# Automatically added by dh_installdeb/11.1.6ubuntu2
dpkg-maintscript-helper rm_conffile /etc/apparmor.d/libvirtd/TEMPLATE 1.2.7-5~ libvirt-bin -- "$@"
# End automatically added section
# Automatically added by dh_installdeb/11.1.6ubuntu2
dpkg-maintscript-helper rm_conffile /etc/apparmor.d/libvirtd/TEMPLATE 1.2.7-5~ libvirt-daemon-system -- "$@"
# End automatically added section
# Automatically added by dh_installdeb/11.1.6ubuntu2
dpkg-maintscript-helper rm_conffile /etc/polkit-1/rules.d/60-libvirt.rules 1.2.9-3~ -- "$@"
# End automatically added section
# Automatically added by dh_installdeb/11.1.6ubuntu2
dpkg-maintscript-helper rm_conffile /etc/apparmor.d/libvirt/TEMPLATE 1.2.7-5~ libvirt-bin -- "$@"
# End automatically added section
# Automatically added by dh_installdeb/11.1.6ubuntu2
dpkg-maintscript-helper rm_conffile /etc/apparmor.d/libvirt/TEMPLATE 1.2.7-5~ libvirt-daemon-system -- "$@"
# End automatically added section
# Automatically added by dh_installdeb/11.1.6ubuntu2
dpkg-maintscript-helper rm_conffile /etc/init.d/virtlockd 3.5.0-1ubuntu1~ -- "$@"
# End automatically added section
# Automatically added by dh_installdeb/11.1.6ubuntu2
dpkg-maintscript-helper rm_conffile /etc/apparmor.d/local/usr.sbin.libvirtd 3.5.0-1ubuntu1~ -- "$@"
# End automatically added section
# Automatically added by dh_installdeb/11.1.6ubuntu2
dpkg-maintscript-helper rm_conffile /etc/apparmor.d/local/usr.lib.libvirt.virt-aa-helper 3.5.0-1ubuntu1~ -- "$@"
# End automatically added section
# Automatically added by dh_installdeb/11.1.6ubuntu2
dpkg-maintscript-helper rm_conffile /etc/cron.daily/libvirt-daemon-system 3.10.0-1ubuntu1~ -- "$@"
# End automatically added section
# Automatically added by dh_installinit/11.1.6ubuntu2
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
if [ -x "/etc/init.d/virtlogd" ]; then
update-rc.d virtlogd defaults >/dev/null
invoke-rc.d virtlogd start || exit 1
fi
fi
# End automatically added section
# Automatically added by dh_installinit/11.1.6ubuntu2
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
if [ -x "/etc/init.d/libvirtd" ]; then
update-rc.d libvirtd defaults 28 72 >/dev/null
if [ -n "$2" ]; then
_dh_action=restart
else
_dh_action=start
fi
invoke-rc.d libvirtd $_dh_action || exit 1
fi
fi
# End automatically added section
# Automatically added by dh_installinit/11.1.6ubuntu2
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
if [ -x "/etc/init.d/libvirt-guests" ]; then
update-rc.d libvirt-guests defaults 29 71 >/dev/null
invoke-rc.d libvirt-guests start || exit 1
fi
fi
# End automatically added section
# We need this after the debhelper generated code so that dpkg-maintscript
# can do its renamming first.
if [ "$1" = "configure" ]; then
# Configure dnsmasq
if [ -f /etc/dnsmasq.d-available/libvirt-daemon ]; then
echo "Setting up libvirt-daemon dnsmasq configuration."
mkdir -p /etc/dnsmasq.d
if [ ! -e /etc/dnsmasq.d/libvirt-daemon ]; then
ln -s /etc/dnsmasq.d-available/libvirt-daemon \
/etc/dnsmasq.d/libvirt-daemon
fi
# if maintscripts removed /etc/dnsmasq.d-available/libvirt-bin
# also remove the depending link created here - can be removed >=18.10
if [ ! -e /etc/dnsmasq.d-available/libvirt-bin ]; then
# ensure to delete only if it is unmodified from the default
if [ "$(readlink /etc/dnsmasq.d/libvirt-bin)" = "/etc/dnsmasq.d-available/libvirt-bin" ]; then
rm -f /etc/dnsmasq.d/libvirt-bin
fi
fi
# Try to restart a potential system wide dnsmasq
invoke-rc.d dnsmasq restart 2>/dev/null || true
fi
# Make sure libvirtd.service is enabled/disabled if
# libvirt-bin.service was.
if [ -f /etc/libvirt/TMP_libvirt-bin-enabled ]; then
deb-systemd-helper enable libvirtd.service
rm -f /etc/libvirt/TMP_libvirt-bin-enabled
elif [ -f /etc/libvirt/TMP_libvirt-bin-disabled ]; then
deb-systemd-helper disable libvirtd.service
rm -f /etc/libvirt/TMP_libvirt-bin-disabled
fi
fi
exit 0
Mini Shell